Siemens SITRANS SCM IQ - Return Procedure; Disposal

NOTICE
Transport with 󹪝tted battery
If the battery is still present in the device when transporting, it could become loose as a result
of vibrations and cause damage within the device.
• Remove the batteries before returning the device.
• Dispose of the batteries according to regulations or include them separately in the return
consignment.
6.6 Return procedure
To return a product to Siemens, see Returns to Siemens (
https://
support.industry.siemens.com/cs/ww/en/sc/3098).
Contact your Siemens representative to clarify if a product is repairable, and how to return
it. They can also help with quick repair processing, a repair cost estimate, or a repair report/
cause of failure report.
NOTICE
Decontamination
The product may have to be decontaminated before it is returned. YourSiemens contact
personwill let you know for which products this is required.
Note
Return of products with lithium batteries
Lithium batteries are dangerous goods according to the Regulation of Dangerous Goods, UN
3090 and UN 3091.
• Remove lithium batteries prior to shipment.
6.7 Disposal
Devices described in this manual should be recycled. They may not be dis‐
posed of in the municipal waste disposal services according to the Directive
2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC and UK, or to a locally
approved disposal service for eco-friendly recycling. Observe the speci󹪝c
regulations valid in your country.
Further information about devices containing batteries can be found at:
Information about battery / product return (WEEE) (https://
support.industry.siemens.com/cs/document/109479891/)
Service and maintenance
6.7Disposal
SITRANS CC220 and SITRANS MS200
60 Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA