Siemens SITRANS SCM IQ - Technical Specifications; Technical Specifications SITRANS CC220

Technical speci󹪝cations
7
7.1 Technical speci󹪝cations SITRANS CC220
Basic speci󹪝cations
Distance between 2 SITRANSCC220 Minimum 30cm
Weight without mounting brackets 400g
Power supply
1
DC12 to 24V
Brief voltage interruption in accord‐
ance with Namur
Up to 5ms bu󹪜er time at 24VDC and full load
2
Max. 10 events per hour; recovery time at least 10s
Current consumption Max. 1.7A
Noise emission < 40dB(A) according to DIN 45635-1
Degree of protection IP20 according to IEC60529
Degree of pollution Device is designed for environments with pollution degree 2
Quality assurance In accordance with ISO 9001
Processor TI SOC AM6548 HS Quad Core with High Security possibility
RAM 2GB RAM (DDR4)
eMMC 16G
Battery-bu󹪜ered real-time clock Yes
1
The device should only be connected to a power supply which meets the requirements of safe extra low
voltage (SELV) according to IEC/EN/DIN EN/UL 61010-1.
2
In the event of low supply voltage, the bu󹪜er time is reduced
Antenna extension cord (optional)
Type WLAN extension cord, SMA male, SMA female
Length Max. 2m
Impedance Coaxial 50Ohm
Interfaces
LAN interface
P1 - X1 LAN - P1, RJ45
1GB LAN port
USB stick speci󹪝cations
Type

USB 3.0 Type A
Supported formatting FAT32
SITRANS CC220 and SITRANS MS200
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA 63