Siemens SITRANS SCM IQ - Installation Instructions SITRANS MS200; Basic Safety Notes SITRANS MS200

3.2 Installation instructions SITRANS MS200
3.2.1 Basic safety notes SITRANS MS200
WARNING
Unsuitable connecting parts
Risk of injury or poisoning.
In case of improper mounting, hot, toxic, and corrosive process media could be released at the
connections.
• Ensure that connecting parts are suitable for connection and process media.
Note
Material compatibility
Siemens can provide you with support concerning selection of parts wetted by process media.
However, you are responsible for the selection of parts. Siemens accepts no liability for faults or
failures resulting from incompatible materials.
CAUTION
Hot surfaces resulting from hot process media
Risk of burns resulting from surface temperatures above 65°C (149°F).
• Take appropriate protective measures, for example contact protection.
• Make sure that protective measures do not cause the maximum permissible ambient
temperature to be exceeded. Refer to the information in Maintenance and repair work for
SITRANS MS200 (Page51).
NOTICE
Condensation in the device
Damage to device through formation of condensation if the temperature di󹪜erence between
transportation or storage and the mounting location exceeds 20°C (36°F).
• Before taking the device into operation, let the device adapt for several hours in the new
environment.
Installing/mounting
3.2Installation instructions SITRANS MS200
SITRANS CC220 and SITRANS MS200
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA 35