3.1.4.2 Horizontal wall mounting
Requirement
• 2 mounting brackets
• 2 screws
• T8 screwdriver
Procedure for mounting
1. Lay the mounting brackets on the rear of the device.
2. Fasten the brackets with supplied screws.
3. Mark the bore holes, drill the required holes in the wall and fasten the device to the wall using
two screws.
Installing/mounting
3.1Installation instructions SITRANS CC220
SITRANS CC220 and SITRANS MS200
30 Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA
To Next Page
Loading...
