Siemens SITRANS SCM IQ - Mounting Positions and Mounting Types

3.1.2 Mounting positions and mounting types
The device can be mounted horizontally or vertically on a DIN rail or to a wall.
Vertical mounting position, recommended Horizontal mounting position






Consider the permitted temperature range for operation that depends on the mounting
position in accordance with the Technical speci󹪝cations SITRANS CC220 (Page63) chapter.
Clearances
Ensure that the following clearances measurements to another component or to a wall of a
housing are complied with:
• Below the device: ≥ 50mm
• Above the device: ≥ 50mm
Installing/mounting
3.1Installation instructions SITRANS CC220
SITRANS CC220 and SITRANS MS200
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA 25