Siemens SITRANS SCM IQ - Wall Mounting; Vertical Wall Mounting

3.1.4 Wall mounting
3.1.4.1 Vertical wall mounting
Note
The device must be installed on the plate of an enclosure.
Requirement
• 2 mounting brackets
• 2 screws
• T8 screwdriver
Procedure for mounting
5(67
4*53"/4$$
1. Lay the mounting brackets on the rear of the device.
2. Fasten the brackets with supplied screws.
3. Mark the bore holes, drill the required holes in the wall and fasten the device to the wall using
two screws.
Installing/mounting
3.1Installation instructions SITRANS CC220
SITRANS CC220 and SITRANS MS200
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA 29