Siemens SITRANS SCM IQ - Replacing SITRANS CC220


Remove the marked screws on
the motherboard.


Remove the motherboard.


Pull the plug of the battery ca‐
ble from the motherboard.



Remove the battery.
Paste the double side tap on
the battery and then paste it on
the display port socket.
Plug in the battery cable on the
motherboard.
Then install the motherboard again and install the top housing.
6.2.4 Replacing SITRANS CC220
Replacing a defective SITRANSCC220
1. Stop anomaly detection models of the SITRANS MS200 assigned to the defective SITRANS
CC220.
2. Replace defective SITRANSCC220 with new SITRANSCC220.
3. Disconnect defective SITRANSCC220 in SITRANS SCM IQ.
Service and maintenance
6.2Maintenance and repair work for SITRANS CC220
SITRANS CC220 and SITRANS MS200
50 Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA