Secure the mounting clips for vertical mounting
1. Lay the rail clamp on the rear of
the device.
2. Fasten the rail clamp with the
supplied screws.
Secure the mounting clips for horizontal mounting
1. Lay the rail clamp on the rear of
the device.
2. Fasten the rail clamp with the
two supplied screws.
3. Lay the brackets on the rear of
the device. Align the bracket
edge with the device edge.
4. Fasten the brackets with the sup‐
plied screws.
Installing/mounting
3.1Installation instructions SITRANS CC220
SITRANS CC220 and SITRANS MS200
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA 27
To Next Page
Loading...
