6. Turn SITRANS MS200 180° and use a suitable tool (e.g. a at-head screw driver) to lift up the
snap ⑥ on the front.
Note
Tool must not touch the PCB.
7. Take o the battery holder cap ⑦.
8. Lift and exchange the battery pack with a Siemens specied battery pack (see Ordering of
spare parts (Page 58)). Ensure that the positive terminal of the battery pack points upwards.
9. Wrap the cable in its original position using the dedicated snaps of the battery holder.
Service and maintenance
6.3Maintenance and repair work for SITRANS MS200
SITRANS CC220 and SITRANS MS200
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA 55
To Next Page
Loading...
