224/232
Building Technologies Boiler Sequence Controller RMK770 CE1P3132en
HVAC Products 16 Addendum 23.04.2009
16.3 Info pages
From the start page (Welcome picture), the Info level (refer to subsection 2.2.3
“Operating levels”) is reached by pressing the INFO button. Here, you find the key plant
data listed. No values can be changed here.
The Info level
comprises several pages. The display depends on the type of plant.
When pressing the INFO button, a change is made from one Info page to the next.
Using the OK button, it is possible to scroll through the Info pages in both directions.
The ESC button is used to switch from the Info level
back to the start page.
Boiler sequencing
Addr no:
Release:
Burner:
Faults:
Boiler sequence manager
State
Cause
Summer operation
Number of avail boil
Boiler sequence manager
Main flow temp actual value
Main flow temp setpoint
Main return temp actual value
MBRT return temp actual value
MBRT return temp minimum
Boiler 1
Actual value boiler temperature
Boiler temperature setpoint
State
Cause
Boiler 2…6
Actual value boiler temperature
Boiler temperature setpoint
State
Cause
Primary controller
Actual value flow temp
Flow temperature setpoint
Actual value return temp
State
Cause
Heating circuit
Preselection
State
Cause
Time switch
(Example)
To Next Page
Loading...
