Areas of application with hydrogen sulde sensor:
• Biogas plants
– Monitoring of fermenters for generating biogas (input and pure sides)
– Monitoring of gas-driven motors (power generation)
– Monitoring of feeding of biogas into the commercial gas network
• Sewage plants
• Drinking water treatment
Areas of application with paramagnetic oxygen sensor
• Flue gas analysis
• Inerting plants
• Room air monitoring
• Medical engineering
Further applications:
• Environmental protection
• Chemical plants
• Cement industry
• Emissions from livestock facilities
Special versions
• The ULTRAMAT 23 with 2 IR components without pump is also available with two separate
gas paths. This allows the measurement of two measuring points as used e.g. for the NO
x
measurement before and after the NO
x
converter.
• Only IR components are available for 19" rack units with piped gas paths
• The ULTRAMAT 23 gas analyzer can be used in emission measuring systems and for process
and safety monitoring.
• For measurement of CO, CO
2
, NO, NO
2
, SO
2
and O
2
according to the requirements of the 13th
BImSchV (German Federal Immission Protection Regulations), 17th BImSchV, 27th BImSchV
and 44th BImSchV (for Germany) or IED and MCPD (for Europe), TA Luft, suitability-tested
versions of the ULTRAMAT 23 are available from TÜV Rheinland.
• The analyzers of the 7MB2355, 7MB2357 and 7MB2358 series are suitability-tested in
accordance with EN 15267 (emission measurements). For the SO
2
component (IR and UV),
the zero point drift is internally compensated via the AUTOCAL function.
• The current certicates and approvals can be found on the Internet at: Approvals and
certicates (https://support.industry.siemens.com/cs/de/en/ps/17728)
• Version with faster response time:
There is no connection between the two condensation traps, so that the complete sample
gas ow passes through the analyzer chambers (only 1/3 of the ow in the normal version
of the analyzers), i.e. the response time is 2/3 faster. The functions of all other components
remain unchanged. Any condensate that forms cannot be removed with this device version.
Description
3.1 Area of application
ULTRAMAT 23
20 Equipment Manual, 04/2022, A5E37100388-012
To Next Page
Loading...
