Sigma 8KBS - Packaging

Refrigerated Centrifuge Sigma 8KS
Refrigerated Centrifuge Sigma 8KBS
4 Storage and transport
Version 08/2012, Rev. 2.5 of 02/07/2018 • sb
29 / 131
Translation of the original operating manual, part no. 0702502
Pos: 92 /100 Sig ma/110 BA Zentrif ugen Sigma (Pr ojekte)/8KS_ 8KBS_8KHBS /040 Lagerung u nd Transport/0 40-0040 V erpackung - Üb erschrift @ 29 \mod_14053273 85434_68.doc x @ 199703 @ 2 @ 1

4.4 Packaging
Pos: 93 /100 Sig ma/110 BA Zentrif ugen Sigma (Pr ojekte)/8KS_ 8KBS_8KHBS /040 Lager ung und Transport/ 040-0042 V erpackung - Te xt flacher Deckel @ 46\mod_1 48161071740 3_68.docx @ 461 752 @ @ 1
WARNING
When unloading the centrifuge, wear safety shoes in order to avoid injuries
caused by the rolling centrifuge!
The centrifuge is packaged in a wooden crate.
• Remove the upper cover.
• Remove the packing material and all of the accessories.
Unloading the centrifuge with a forklift truck
One side panel of the crate has metal fittings (see the following illustration,
detail A).
• Remove the two lower screws of each of the metal fittings and then the
four outer screws in the upper half of the side panel (see the following
illustration). Then, remove the side panel.
1 Metal fittings