Refrigerated Centrifuge Sigma 8KS
Refrigerated Centrifuge Sigma 8KBS
Version 08/2012, Rev. 2.5 of 02/07/2018 • sb
Translation of the original operating manual, part no. 0702502
Pos: 169 /100 Sig ma/100 BA Ze ntrifugen Sig ma (Standardmo dule)/060 Betrieb _Spincontrol L+S/Spincontrol S (Z ent7)/060- 0030-0020-0 100 Kontrastä nderung @ 27\ mod_140532 0232376_68.doc x @ 193431 @ 4 @ 1
6.3.2.12 Changing the contrast
To change the contrast:
• Press and hold the stop button and turn the function knob one notch to
the left. A dialog box will be displayed once the stop button is released.
• Adjust the contrast of the centrifuge display and confirm the change.
Fig. 37: Dialog box for changing the contrast
Pos: 170 /010 Uni versalmodule/ Leerzeile @ 0\mod_12 02116244500 _0.docx @ 1 14 @ @ 1
Pos: 171 /010 Uni versalmodule/ Leerz eile @ 0\mod_12 02116244500 _0.docx @ 1 14 @ @ 1
Pos: 172 /100 Sig ma/100 BA Ze ntrifugen Sig ma (Standardmo dule)/060 Betrieb _Spincontrol L+S/Spincontrol S (Z ent7)/060- 0030-0030 Programmbetri eb @ 27\mod_ 1405320235093 _68.docx @ 193459 @ 3 @ 1
6.3.3 Program mode
A program contains all of the data that are required for a centrifuge run.
Certain sedimentation results can be repeated under identical conditions.
Programs can be loaded, executed, edited, and deleted when the
centrifuge is at a standstill.
A maximum of 60 programs can be stored under the numbers 1-60. The
program "RAPID_TEMP" does not occupy any storage location and cannot
be deleted. It is used to bring the centrifuge to a specific temperature
without any vessels.
"--" means that the values that are currently set are not a stored program.
The programs can be protected against unauthorised use, modification, or
deletion with the aid of a code (see chapter 6.3.2.7 - "Parameters menu").
Stored programs are listed in the "Process library" menu .
Pos: 173 /010 Uni versalmodule/ Seitenwechsel @ 0\mod_12 02116244312 _0.docx @ 105 @ @ 1
To Next Page
Loading...
