Refrigerated Centrifuge Sigma 8KS
Refrigerated Centrifuge Sigma 8KBS
Version 08/2012, Rev. 2.5 of 02/07/2018 • sb
Translation of the original operating manual, part no. 0702502
• Move the pallet jack over the ramp and under the centrifuge and lift the
centrifuge off the bottom of the crate.
• Unload the centrifuge carefully via the ramp. While doing so secure the
centrifuge with a sufficient number of persons in order to prevent it from
slipping off to the side.
Do not unload the centrifuge via the ramp on its castors since, in this case,
the centrifuge would be difficult to steer and could slip off the ramp.
Unloading the centrifuge with an electric pallet jack
Due to its design and dimensions, an electric pallet jack is not suitable for
unloading the centrifuge.
• Retain the packaging for any possible future transport of the centrifuge.
Pos: 94 /010 Uni versalmodule/A bschnittsw echsel @ 0\mod_ 12021245140 62_0.docx @ 4 18 @ @ 1
Pos: 95 /010 Uni versalmodule/S eitenwechsel @ 0\mod_120 2116244312_ 0.docx @ 105 @ @ 1
To Next Page
Loading...
