Sigma 8KBS - Page 35

Refrigerated Centrifuge Sigma 8KS
Refrigerated Centrifuge Sigma 8KBS
5 Set-up and connection
Version 08/2012, Rev. 2.5 of 02/07/2018 • sb
35 / 131
Translation of the original operating manual, part no. 0702502
• Open the lid with the emergency lid release system. To do so, lift off the
plugs on the left side (e.g. with a screwdriver) and unlock the lid locks
by turning them clockwise with the supplied square spanner (see
chapter 7.1.1 - "Emergency lid release").
• Align the centrifuge with a spirit level in two directions.
• Tighten the four lock nuts and close the front door.
• Plug in the mains power plug.
1 Locking screw
2 Lock nut
Fig. 13: Alignment at the front
3 Adjusting foot
4 Castor
Fig. 14: Alignment at the back
Pos: 106 /010 Uni versalmodule/ Seitenwechsel @ 0\mod_12 02116244312 _0.docx @ 105 @ @ 1