SILENT KNIGHT 4821 - 6.2.1-6.2.2 Touchpad Menu Navigation

Model 4821/4820 Control/Communicator Installation Manual
6-2 150966
You can use the editing keys as described in Table 1 for programming.
When you successfully complete a task, the system will sound a tone and momentarily display
the message SUCCESS on the LCD.
6.2.2 The Main Menu
To access the main menu, press
[Installer’s Code].
The touchpad cycles through the
following selections:
You can choose a selection at any time during the cycle by pressing the number associated
with the selection on the touchpad.
To exit touchpad programming, press the button.
Table 6-1: Touchpad Programming Editing Keys
Key Description
Press this button to return to the main menu or to the previous level. A prompt will display
for you to confirm the changes made in the editing session.
The system will prompt you for saving changes. Press 0 to exit the current menu without
saving changes.
The system will prompt you for saving changes. Press 9 to save changes and exit the
current menu.
Press this button to see additional options for the current menu.
1-Install Device 4-Edit Ph. Lines 7-Edit Profiles
2-Edit Sys. Opt. 5-Reprt Accounts 8-Edit Schedules
3-Edit Partition 6-Print Accounts 9-Delete Options
MUTE
0
9
ENTR
8
ENTR
MUTE