System Operation
150965 5-9
5.6 Interactive Menu Overview
The general structure of the interactive menu system is shown below. Available options will
vary depending on whether optional features have been enabled through programming for the
area. The chart below shows all available options.
Main Menu
To Press
Enter/exit the menu.
Enter a code to enter; press to exit.
Select an area. Enter area number (1-8). Options available for that area display.
(See sub-menu section below.)
Arm all areas.
Press Turns the system ON.
Disarm/reset all areas.
Press Turns the system OFF.
Mute all trouble conditions.
Press .
View status of system.
Press .
Interactive Sub-Menu (displays when you select an area)
To: Press From here you can press:
Disarm/Reset this Area
Arm this Area
Set Arm Time
Set Delay
- Make Instant
- Use Delays
Set Interior
1. Select the interior you wish to control (if both interiors used).
2. Press to turn Interior On or to turn Interior Off
Set Chime
- Chime On
- Chime Off
See Current Status of
System
Bypass Menu
- Bypass Status
- Bypass a Zone
- Unbypass a Zone Select the zone # then press
ENTR
9
0
MUTE
STAT
0
9
1
DLY
9
0
INT
9 0
CHM
9
0
STAT
BYPS
0
1
2
ENTR
To Next Page
Loading...
Need help?
General
