96 |
List of abbreviations | GN70/MX610/MX612 Operator and Installation Manual
List of abbreviations
The following table holds a list of abbreviations used in display examples etc. in this manual.
AIS Automatic Identification System
BTW Bearing To Waypoint
BWW Bearing Waypoint to Waypoint
CDU Control Display Unit
COG Course Over Ground
CRS Course
CTS Course To Steer
DGPS Differential Global Positioning System
DSC Digital Selective Calling
DTD Distance To Destination
DTW Distance To Waypoint
EGNOS European Geostationary Navigation Overlay System
ETA Estimated Time of Arrival
ETW Estimated Time of arrival at next Waypoint
GLONASS Global Orbiting Navigational Satellite System
GMDSS Global Maritime Distress and Safety System
GNSS Global Navigation Satellite System
GPS Global Positioning System
HDOP Horizontal Dilution Of Precision
HDG Heading
MAG Magnetic
MAN Manual (speed input)
MOB Man OverBoard
MSAS Multi-functional Satellite Augmentation System
N2K NMEA2000 network specified by National Marine Electronics Association and
standardized as IEC 61162-3
RAIM Receiver Autonomous Integrity Monitoring
ROT Rate Of Turn
RTCM Radio Technical Commission For Maritime
SBAS Satellite Based Augmentation System
SOG Speed Over Ground
STEER Course to steer towards next waypoint
STW Speed Through Water
TTD Time To Destination
WAAS Wide Area Augmentation System
WPT Waypoint (followed by waypoint name)
XTD Cross Track Distance
17
To Next Page
Loading...
