Sindoh MF Series - 2. Scan a document with computer

4-3
Scanner
4
2. Scan a document with computer
After installing TWAIN driver, you can scan documents with this device.
By using applications installed in your computer, you can edit or process scanned images.
2.1 Scan a document with computer
With TWAIN driver compatible applications, you can scan a document and send it to computer.
1
Run the TWAIN compatible program.
2 Scan the document using the application program. Scanning procedures vary depending on user’s program.
For more information, refer to the program manual.
3
Select a scanner device.
Click “SINDOH N410 N610 Series TWAIN” if you are using a USB cable to scan.
Select “SINDOH N410n N610n Series NETWORK TWAIN” if you are using a network cable to scan.
4
Configure the settings for scanner driver.
See the
[Scan driver setting menu]
table below for details.
5
If you want to scan a portion of document, select
[Preview]
in the scanner driver to scan in a low resolution. To
scan the whole document, go to the step
7
.
6
Select a desired scanning area in the preview window.
7
Press
[Scan]
button to start scanning.
8
The scanned image is transferred to the application program.