Preparation for using MFP
1-34
1
Load index papers (tab papers)
Up to 20 index papers can be loaded.
1 Face down the side to print, but adjust the paper so that the tab side goes into MFP later.
Push the index paper until the edge reaches inside.
2 Slide the guide to adjust the size of the paper to load.
3 When feeding papers into MPT, the paper setting screen automatically appears on the LCD display.
Change paper size and type on the LCD display.
If the size to set cannot be found in the paper size list, check the size and enter a size in [Direct input]. For details
on direct input, see P. 2-5 「When selecting Manual Paper Tray (MPT)」.
To Next Page
