1-19
Preparation for using MFP
1
7. Place original
7.1 Place original in ARDF
ARDF supplies originals, one by one from the page on the top.
ARDF is convenient to use to make a copy or scan for multiple pages
1 Adjust the original guide in the direction as in the below figure.
2 Face up the side to copy or scan and push the originals until it stop.
-
When placing originals, do not place 90 or more pages for a single job.
Do not exceed the max height of the originals. It may cause paper jam, damage, or malfunction
of ARDF.
To Next Page
