Sindoh MF Series - Available Paper Sizes; Cautions for Proper Job; Papers Not Allowed

1-25
Preparation for using MFP
1
8.2 Available paper sizes
Tray type Available paper size
MPT(manual tray) A3, A4, A5, A6, B4, B5 (JIS), B6, Ledger (11×17), Legal (8-1/2×14),
Letter (8-1/2×11), Executive(7-1/4×10-1/2), Statement(5-1/2×8-1/2), Foolscap(8×13),
8-1/8×13-1/4, Folio (8-1/4×13), Government Legal(8-1/2×13),
8-1/2×13-1/2, 220 mm×330 mm, 8K, 16K photo size 4×6
Width : 3-9/16 inches ~ 12-5/8 inches(90 mm ~ 297 mm),
Length : 5-1/2 inches ~ 17 inches(139.7 mm ~ 431.8 mm)
Tray 1 A4, A5, B4, B5 (JIS), Legal(8-1/2×14), Letter(8-1/2 ×11), Foolscap(8×13),
Folio(8-1/4×13), Government Legal(8-1/2×13), Statement(5-1/2×8-1/2),
8-1/2×13-1/2, 16K
Tray 2,
Tray 3(optional),
Tray 4(optional)
A3, A4, A5, B4, B5 (JIS), Ledger(11×17), Legal(8-1/2×14), Letter(8-1/2×11),
Foolscap(8×13), Folio(8-1/4×13), Government legal(8-1/2×13),
Statement(5-1/2×8-1/2), 8-1/2×13-1/2, 8K, 16K
Auto reverse docu-
ment feeder (ARDF)
A3, A4, A5, A6, B4, B5 (JIS), B6, Ledger(11×17), Legal(8-1/2×14),
Letter(8-1/2×11), Executive(7-1/4×10-1/2), Statement(5-1/2 ×8-1/2), Foolscap(8×13),
8-1/8×13-1/4, Folio(8-1/4×13), Government Legal(8-1/2×13), 8-1/2×13-1/2,
220 mm×330mm, 8K, 16K photo size 4×6
Width : 5-1/2 inches ~ 12-5/8 inches(139.7 mm ~ 320 mm),
Length : 5-13/16 inches ~ 18 inches(148 mm ~ 457.2 mm)
8.3 Cautions for proper job
Papers not allowed
Do not use the following papers in the paper tray. Failure to follow the cautions may result in low print quality, paper
jam or device damage.
- Printed paper from thermal transfer or ink-jet printer
- Folded, rolled, wrinkled, or torn paper
- Papers left for a long time without packaging
- Wet, holed, or punched papers
- Very slippery, rough, or uneven papers
- Processed paper such as carbon, thermal sensitive, pressure sensitive, or transfer paper
- Foiled or bubble processed paper
- Non-standardized paper (non-quadrangle paper)
- Papers combined with glue, staples, or clips
- Papers with label
- Paper with ribbon, hook, or button
- Paper with different roughness on both sides
- Too thin or thick paper
- Paper with static electricity
- Acid-processed paper
- Other papers not suitable for use