Preparation for using MFP
1-18
1
6.3 Supported originals
Originals available to use in ARDF
Item Specification
Paper type
1side Regular paper (9-5/16lb ~ 34-1/16lb (35g/m2 ~ 128g/m2))
2side Regular paper (13-5/16lb ~ 34-1/16lb (50g/m2 ~ 128g/m2))
Mixed Regular paper (9-5/16lb ~ 34-1/16lb (35g/m2 ~ 128g/m2))
Max original
size
A3 or Ledger (11 X 17)
Fax: 11-11/16 inch X 39-3/8 inch (297mm X 1000mm)
Original supply
Up to 90 sheets(20lb(75g/m2))
-
Do not load the following papers to ARDF. When using them, paper jam or damage may occur.
Wrinkled, folded, rolled or torn originals
Semi or full transparent originals such as transparent film or direct process paper
Coated originals such as carbon-backup paper
Originals lighter than 9-5/16 lb(35 g/m2) or heavier than 34-1/16 lb(128 g/m2)
Originals combined with staples or clips
Originals combined as a booklet
Originals combined with glue
Originals which are cut or which contain cut-out page
Label paper
Offset print master
Papers under development
Glossy originals with coating
Originals available to use on flatbed glass
Item Specification
Original type
Paper, booklet (with two sides open), post card, 3 dimensional object
Max original size
A3 or Ledger (11 X 17)
Weight on flatbed
Max 4-7/16 lb(2Kg)
To Next Page
