FMON10JEN 07.04.2017 Rev. 10J
9 (9)
4 Safety instructions
General instructions
These safety instructions should be read and followed by any persons working on the product and
those who supervise or instruct the group of persons mentioned above. In addition, the owner must
ensure that the relevant personnel are fully familiar with the contents of the instructions.
These instructions must be kept near these products for periodic review and for review by new users
of these products.
The described products have been manufactured according to the state of the art. However, if the
products are used for other than their intended purpose, there may be new risks that arise which may
result in personal injury or property damage.
Any malfunctions which may affect safety must be remedied immediately. In addition to these instruc-
tions, general statutory regulations for accident prevention and environmental protection must be ob-
served
General behaviour when handling the product
Please follow these instructions whenever you use the product. If the product isnot in proper and safe
technical conditionor you are unaware of the potential hazards, do not use the product.
Familiarize yourself with the functions and operation of the product. All specified assembly and oper-
ating steps must be competed in the indicated order.
Any points regarding proper and safe condition or correct assembly/operation that you do not under-
stand must be clarified. Operation is prohibited until issues have been clarified.
Keep unauthorized persons away.
Always wear appropriate personal protective equipment.
Responsibilities for different activities must be clearly defined and observed. Uncertainty is a major
risk factor for safety.
Safeguards and other protective and emergency equipment must not be removed, modified, discon-
nected or otherwise disabled. Their completeness and function must also be checked at regular inter-
vals.
If a safeguard or other protective equipment has to be detached, it must be reattached and tested
immediately after the work is complete and before using the product.
Remedy any faults included in your area of responsibility. If the fault is beyond your competence, noti-
fy your supervisor immediately of the fault.
Do not stand on or climb on any parts of the centralised lubrication system or of the machine.
Intended use
This equipment supplies lubricants within a centralised lubrication system in accordance with the specifica-
tions, technical data and limits stated in these instructions:
Usage is allowed exclusively for professional users in commercial and economic activities.
To Next Page
Loading...
