FMON10JEN 07.04.2017 Rev. 10J
11 (11)
Notes concerning the
type identification plate
The type identification plate indicates the type desig-
nation, order code and other key details of the ma-
chine. It locate inside of flowmeter (see page 35). To
make sure no information is lost if the type identifica-
tion plate becomes illegible, enter the details in this
manual.
Type _______________________________
Code ________________________________
Date of manufacture ________________________
Notes concerning CE marking
The product bears the CE marking and conforms to the following European directives:
EMC Directive 2014/30/EU
RoHS II 2011/65/EU
Persons authorised to operate the device
4.11.1 Operators
A person who is qualified to carry out the functions and activities related to normal operation based on his or
her training, knowledge and experience. This includes avoiding possible hazards that may arise during opera-
tion.
4.11.2 Mechanical specialist
Person with appropriate professional education, knowledge and experience to detect and avoid the mechani-
cal hazards that may arise during transport, installation, commissioning, operation, maintenance, repair and
disassembly.
4.11.3 Electrician
Person with appropriate professional education, knowledge and experience to detect and avoid electrical haz-
ards.
To Next Page
Loading...
