1. Safety instructions
1.4 Foreseeable misuse
Any usage of the product other than as
specified in this manual is strictly prohibited.
Particularly prohibited are:
○ Use outside the specified operating tem-
perature range
○ Use of non-specified equipment
○ Use without a pressure regulating valve
○ Use in areas with aggressive, corrosive
substances (e.g., high ozone loads)
○ Use in areas with damaging radiation
(e.g., ionizing radiation)
○ Use to feed, forward, or store hazardous
substances and mixtures as defined in
Annex I Part 2-5 of the CLP Regulation
(EC 1272/2008) that are marked with
hazard pictograms
GHS01-GHS 09
○ Use to feed / forward / store gases, lique-
fied gases, dissolved gases, vapors, or
fluids whose vapor pressure exceeds nor-
mal atmospheric pressure (1013 mbar)
by more than 0.5 bar at their maximum
permissible operating temperature
○ Use in an explosion protection zone
1.5 Painting plastic components
The painting of all plastic components and
seals of the products described here is
prohibited.
Completely remove or mask affected compo-
nents before painting the main machine.
1.6 Modifications to the product
Unauthorized modifications and changes
can have an unpredictable effect on safety.
Unauthorized modifications and changes
are therefore prohibited.
1.7 Prohibition of certain activities
The following activities must be performed
only by employees of the manufacturer or
authorized persons due to possibly unde-
tectable sources of error or due to statutory
requirements:
1.8 Inspections prior to delivery
The following tests were performed prior to
delivery:
○ Safety and functional tests
- 10 -
951-230-008-EN
Version 04
ENEN
To Next Page
Loading...
Need help?
General
