1. Safety instructions
1.9 Referenced documents
In addition to this manual, the following
documents must be observed by the re-
spective target group:
○ Operational instructions, approval rules
○ The safety data sheet of the lubricant
used
If necessary:
○ Project planning documents
○ Instructions from suppliers of purchased
parts
○ Instructions for other components for
setting up the centralized lubrication
system
○ Other relevant documents for integration
of the product into the main machine,
system
1.11 Note on Pressure Equipment
Directive 2014/68/EU
Due to its performance characteristics, the
product does not reach the limit values
defined in Article 4, Paragraph 1, Subpara-
graph (a) item (i) and is, pursuant to Article
4, Paragraph 3, excluded from the scope of
Pressure Equipment Directive 2014/68/EU.
1.12 Persons authorized to use
the product
1.12.1 Operator
A person competent due to training, knowl-
edge, and experience to execute the func-
tions and activities associated with normal
operation; this also includes the avoidance
of possible hazards that may arise during
operation.
SKF Lubrication Systems Germany GmbH
VPK*-**-***
XYZ
KW/JJ
Made in Czech Republic
VPB*-*-***
KW/JJ
XYZ
SKF Lubrication Systems Germany GmbH
Made in Czech Republic
1.10 Note on the type plate
The type plate provides important data such
as the type designation, order number, etc.
To avoid loss of this data in case the type
plate becomes illegible, these characteristics
should be entered in the manual.
Type _______________________________
Serial No. ______________________
Date _________________
1
- 11 -
951-230-008-EN
Version 04
ENEN
To Next Page
Loading...
Need help?
General
