10. Maintenance
10. Maintenance
SKF progressive metering devices are
maintenance-free. All connections and fit-
tings must be regularly inspected for proper
seating to ensure proper function. If nec-
essary, the product can be cleaned using
mild cleaning agents that are compatible
with the product's materials (non-alkaline,
non-soap).
Do not allow any cleaning agent to enter the
interior of the product during cleaning. It is
normally not necessary to clean the interior
of the product.
The interior of the product must be cleaned
if incorrect or contaminated lubricant is ac-
cidentally filled into the product.
Contact the SKF Service department if this
occurs.
IMPORTANT NOTE
Dismantling of the product or individual
parts thereof within the statutory warran-
ty period is prohibited and voids any
claims.
SKF shall not be held liable for damages
resulting from improperly performed as-
sembly, maintenance, or repair work on the
product.
IMPORTANT NOTE
Only original SKF spare parts may be used.
Unauthorized alterations to products and
the use of non-original spare parts and
accessories are prohibited and nullify the
statutory warranty.
IMPORTANT NOTE
Use only clean lubricant. The purity of the
lubricants used is the decisive factor in
the service life of the progressive meter-
ing device and the lubricated machinery
elements.
10.1 General information
10
9
- 91 -
951-230-008-EN
Version 04
EN
To Next Page
Loading...
Need help?
General
