5. Delivery, returns, and storage
- 46 -
951-230-008-EN
Version 04
There are no restrictions for land, air, or sea
transport.
After receipt of the shipment, the product(s)
must be inspected for damage and for com-
pleteness according to the shipping docu-
ments. The packaging material must be pre-
served until any discrepancies are resolved.
SKF Lubrication Systems Germany GmbH
products are subject to the following storage
conditions:
5.1 Lubrication units
o Ambient conditions: dry and dust-free
surroundings, storage in well ventilated
dry area
o Storage time:
- Unfilled: max. 24 months
- Filled: max. 12 months
o Permissible humidity: < 65%
o Storage temperature: + 10 - +40°C
Light: Avoid direct sun or UV exposure
and shield nearby sources of heat
5. Delivery, returns, and storage
SKF Lubrication Systems Germany GmbH
products are packaged in accordance with
standard commercial practice according to
the regulations of the recipient's country
and DIN ISO 9001. During transport, safe
handling must be ensured and the product
must be protected from mechanical effects
such as impacts. The transport packaging
must be marked "Do not drop!"
CAUTION
Tilting/dropping hazard
Do not tilt or drop the product.
5.2 General notes
o The product(s) can be enveloped in plastic
film to provide low-dust storage.
o Protect against ground moisture by stor-
ing on a shelf or wooden pallet.
o Bright-finished metallic surfaces, espe-
cially wearing parts and assembly sur-
faces, must be protected using long-term
anti-corrosive agents before storage.
o At approx. 6-month intervals:
o Check for corrosion. If there are signs of
corrosion, reapply anti-corrosive agents.
o Drives must be protected from mechani-
cal damage.
EN
To Next Page
Loading...
Need help?
General
