1. Safety instructions
1.12.2 Qualified mechanic
A person with appropriate technical train-
ing, knowledge, and experience who can
recognize and avoid the hazards that may
occur during transport, assembly, first start-
up, operation, maintenance, repair, and
dismantling
1.12.3 Qualified electrician
A person with appropriate technical training,
knowledge, and experience who can recog-
nize and avoid hazards that may result from
electricity
1.13 Instruction of outside fitters
Before commencing work, the operator
must inform outside fitters of the opera-
tional safety regulations, applicable accident
prevention regulations, and the functions of
the main machine and its protective devices.
1.14 Provision of personal protective
gear
The operator must provide personal protec-
tive gear appropriate for the location and
intended application.
1.15 Operation
The following must be observed during first
start-up and operation:
○ All information within this manual and
all information within the referenced
documents
○ All laws and regulations that the operator
must observe
1.16 Emergency shutdown
Shut down the product in an emergency by:
○ Switching off the main machine in which
the product is integrated
○ If necessary, pressing the on/off switch on
the main machine
1.17 Transport, assembly, maintenance,
malfunction, repair, shutdown, disposal
○ All relevant persons must be informed of
the activity prior to the start of this work.
Precautionary operational measures,
work instructions must be observed.
○ Transport only with suitable transport
and lifting gear on suitable paths.
○ Maintenance and repair work can be
subject to restrictions at low or high tem-
- 12 -
951-230-008-EN
Version 04
ENEN
To Next Page
Loading...
Need help?
General
