8. Operation / 9. Cleaning
8
8. Operation
CAUTION
The product and its equipotential
bonding connection must be con-
nected to the equipotential bonding
of the main machine.
SKF products operate automatically.
The activities required during normal op-
eration are limited primarily to checking the
connections and cleaning of the exterior of
the product if contaminated.
9. Cleaning
WARNING
Electric shock
Perform cleaning work only on prod-
ucts that have been de-energized
and depressurized.
Do not touch cables or electri-
cal components with wet or moist
hands.
Use steam-jet equipment or high-
pressure cleaners only in accordance
with the IP protection class of the
pump. Otherwise, electrical compo-
nents may be damaged.
Cleaning, required personal pro-
tective gear, cleaning agents, and
equipment are in accordance with
the current operating rules of the
operator.
9.1 Cleaning agents
Only cleaning agents compatible with the
materials can be used for cleaning (see Sec-
tion 2.3 for materials).
Always completely remove residue
of the cleaning agent on the prod-
uct and rinse with clear water. This
prevents the formation of alkaline
deposits.
9
7
- 89 -
951-230-008-EN
Version 04
EN
To Next Page
Loading...
Need help?
General
