8. Operation / 9. Cleaning
9.2 Exterior cleaning
• Mark and secure wet areas.
• Unauthorized persons must be kept
away.
• Thoroughly clean all external surfaces
with a moist cloth.
9.3 Interior cleaning
The interior normally does not need to be
cleaned.
The interior of the product must be cleaned
if incorrect or contaminated lubricant is ac-
cidentally filled.
Please contact SKF Customer Service.
9.4 Cleaning the NAMUR sensor
If the active sensor surface becomes con-
taminated, it must be cleaned with a cloth.
- 90 -
951-230-008-EN
Version 04
EN
To Next Page
Loading...
Need help?
General
