SKF VP Series Component Lifecycle Manual

- 7 -
951-230-008-EN
Version 04
EN
Instructions placed on a unit, machine, or
equipment, such as:
 Rotation arrows
 Fluid connection labels
must be followed and kept in fully legible
condition.
Read the component manual thoroughly
and follow the safety instructions.
Explanation of symbols and signs
Abbreviations and conversion factors
Abbreviations
re regarding oz. ounce
approx. approximately psi pound per square inch
°C degrees Celsius RH relative humidity
cu.in cubic inch s second
dB (A) sound pressure level sq.in. square inch
i.e. that is etc. et cetera
etc. et cetera e.g. for example
poss. possibly > greater than
°F degrees Fahrenheit < less than
fl.ou. fluid ounce ± plus or minus
fpsec feet per second Ø diameter
gal. gallon
if necessary if necessary
Conversion factors
hp horsepower Length 1 mm 0.03937 inch
usually usually Area 1 cm² 0.155 sq.in.
in. inch Volume 1 ml 0.0352 fl.oz.
incl. including 1 l 2.11416 pints (US)
K Kelvin Mass 1 kg 2.205 lbs
kg kilogram 1 g 0.03527 oz.
kp kilopond Density 1 kg/cm³ 8.3454 lb./gal. (US)
kW kilowatt 1 kg/cm³ 0.03613 lb./cu.in.
l liter Force 1 N 0.10197 kp
lb. pound Speed 1 m/s 3.28084 fpsec.
max. maximum 1 m/s 2.23694 mph
min. minimum Acceleration 1 m/s² 3.28084 ft./s²
min minute Pressure 1 bar 14.5 psi
ml milliliter Temperature °C (°F-32) x 5/9
mm millimeter Power 1 kW 1.34109 hp
mph miles per hour
N Newton
Nm Newton meter

SKF VP Series Specifications

General

Brand	SKF
Model	VP Series
Category	Industrial Equipment
Language	English