Section 01 SERVICE TOOLS AND SERVICE PRODUCTS
Subsection 02 (SERVICE PRODUCTS)
01-02-2 MMR2000_114_01_02A.FM
MANDATORY SERVICE PRODUCTS (continued)
Gasket/paint remover
(P/N 413 708 500)
Loctite
®
Chisel
510 g (18 oz)
A00B574
APPLICATION
Clean mating surfaces of cylinders
and crankcase. Remove carbon in
combustion chambers.
Loctite
®
primer
(P/N 293 800 041)
Primer N
170 g (6 oz)
A00B3N4
APPLICATION
To prepare mating surfaces before
applying paste gasket, retaining
compound or threadlockers.
NOTE: Only the P/N has been
changed. This product is identical
to the P/N 413 708 100.
Silicone compound
(P/N 293 550 004)
Dow Corning
®
MS4
A00B3R4
APPLICATION
Lubricate pawl and pawl lock of re-
wind starter.
NOTE: Only the P/N has been
changed. This product is identical
to the P/N 420 897 061.
Grease Isoflex
(50 g)
(P/N 293 550 021)
A00B554
APPLICATION
To lubricate some bearings on 3-
cylinder, 453, 493, 593 and 693 en-
gines.
Petamo grease
(P/N 420 899 271)
A00B584
APPLICATION
To lubricate lip of all ZX series en-
gine crankshaft seals.
To Next Page
Loading...
