8 Operation
SMA Solar Technology AG
Operating manual EVC22-3AC-20-BE-en-10 69
Position Designation Description
B User settings Provides the following functions:
• Configuring personal data
• Logout
C System information Displays the following information:
• System
• Device information
• Licenses
• eManual
D Content Area Displays the dashboard or content of the se-
lected menu.
E Configuration Offers different views for configuration, depend-
ing on the selected level and user role.
F Monitoring Offers different views for monitoring, depending
on the scope of the connected devices.
G Dashboard Displays information and instantaneous values
of the device or system currently selected.
H Home Opens the user interface home page
8.3 Access rights to the user interface
1 administrator is created during registration. As administrator, you can add further system users
who can configure user rights or delete users.
This gives users access to the system and to the devices recorded in the system.
You can assign the following rights for users:
• Administrator
• User
• Installer
8.4 Changing parameters
The parameters of the product are set to certain values by default. You can change the parameters
to optimize the performance of the product.
This section describes the basic procedure for changing parameters. Always change parameters as
described in this section.
Requirements:
☐ The user interface must be open and you must be logged in.
☐ Changes to grid-relevant parameters must be approved by the responsible grid operator, and
can only be made as Administrator or Installer.
To Next Page
Loading...
