8 Operation
SMA Solar Technology AG
Operating manualEVC22-3AC-20-BE-en-1080
• Stop the charging process at the vehicle (see manufacturer's instructions). Make sure that the
charging process is properly stopped at the vehicle and that the charging socket is unlocked
by the vehicle before the charging cable is pulled out in order to avoid damage to the
charging cable or the connector on the vehicle.
• Note: the charging cable remains connected to the charging station if the parameter Lock
charging cable to charging station is activated.
Also see:
• Device Configuration⇒page74
8.13.6 Set ambient lighting
Procedure:
1. Choose the product in the focus navigation.
2. Select the menu Configuration.
3. Select the Parameters menu item.
4. Find the parameter via Enable ambient lighting search and select [On].
5. Find the parameter Ambient lighting brightness via search and adjust the brightness of the
ambient lighting.
6. Click on [Save].
To Next Page
Loading...
