8 Operation
SMA Solar Technology AG
Operating manualEVC22-3AC-20-BE-en-1074
3. Select the Device management menu item.
4. In the row of the device to be deleted, click the button.
5. Select Delete device.
6. Select [Delete] in the displayed message.
8.11 Resetting the product to default setting
Loss of data due to replacement or due to resetting to default settings
If the product is reset to the default settings or replaced, all data saved in the product and the
admin account will be deleted. Some of the data saved in SunnyPortal can be transmitted to
the product after calling up the SunnyPortal system again.
Requirements:
☐ The user interface must be open and you must be logged in.
Procedure:
1. Select the product in the focus navigation.
2. Select the menu Configuration.
3. Select the menu item Device properties.
4. Select the button [If you want to reset the device to the default settings, click here].
5. Select [Reset].
8.12 Deleting the Admin Account
In case the password gets lost, the admin account can be reset and newly created. All system data
will be retained.
Requirements:
☐ The device key on the sheet with the password sticker from the included documentation
package must be available.
☐ The login page of the user interface must be open.
Procedure:
1. Select the [Delete admin account?] button.
2. Enter the device key from the sheet with the password sticker from the included documentation
package.
3. Select [Delete].
☑ The product is performing a restart. Then a new admin account can be created.
8.13 Product-specific settings
8.13.1 Device Configuration
You can adjust the settings at the grid connection point and the charging settings.
To Next Page
Loading...