SMA SUNNY ISLAND 6.0H - Page 24

5 Operating the Sunny Island via Sunny Remote Control SMA Solar Technology AG
24 SI60H-80H-BE-en-20 Operating Manual
Status of the Sunny Island
Figure9: Status of the Sunny Island (example)
State of charge of the battery
Figure10: State of charge of the battery in standard mode (example)
Position Symbol Designation Explanation
A Warning symbol Symbol for warnings and errors that do not affect the Sunny Island
operation.
If this symbol is flashing, acknowledge the error or warning (see
Section9.2, page41).
B Device assignment The Sunny Island connected to the Sunny Remote Control is the
master.
The Sunny Island connected to the Sunny Remote Control is slave 1.
The Sunny Island connected to the Sunny Remote Control is slave 2.
C SD memory card The SD memory card is inserted.
Symbol
flashing
The Sunny Island is accessing the SD memory card.
No
symbol
The SD memory card is not inserted.
D Multifunction relay 1 Multifunction relay 1 is deactivated.
Multifunction relay 1 is activated.
E Multifunction relay 2 Multifunction relay 2 is deactivated.
Multifunction relay 2 is activated.
F hh:mm:ss Time Off-grid system time
Position Designation Explanation
A Battery Battery symbol
B State of charge State of charge of the battery in percent