13 Directory of the Parameters in Installer Mode and Expert Mode SMA Solar Technology AG
98 SI60H-80H-BE-en-20 Operating Manual
222# Chargemode
221.06 BatWirRes Resistance of the battery cable in mΩ
(expert mode)
0 mΩ to 100mΩ ‒ 0mΩ
221.07 BatFanTmpStr Start temperature for the BatFan
function of the multifunction relay
in °C
20°C to
221.04 BatTmpMax
‒ 40°C
No. Name Description Value Explanation Default
value
222.01 BatChrgCurMax Maximum battery charging current in A 10 A to
900 A
‒900A
222.02 AptTmBoost Absorption time of the boost charge in
minutes (expert mode)
1min to
600 min
For VRLA 180 min
For FLA 90 min
222.03 AptTmFul Absorption time for full charge in hours
(expert mode)
1.0 h to 20.0
h
‒6.0 h
222.04 AptTmEqu Absorption time for equalization charge
in hours (expert mode)
1.0 h to 48.0
h
‒ 12.0 h
222.05 CycTmFul Cycle time of full charge in days (expert
mode)
1dto 180d ‒ 14d
222.06 CycTmEqu Cycle time of equalization charge in days
(expert mode)
7 d to 365 d ‒ 90 d
222.07 ChrgVtgBoost Setpoint of the cell voltage at boost charge
in V (expert mode)
2.20 V to
2.70 V
VRLA 2.40 V
FLA, Off-Grid 2.40 V
FLA, On-Grid 2.55 V
222.08 ChrgVtgFul Cell voltage setpoint for full charge in V
(expert mode)
2.30 V to
2.70 V
Off-Grid 2.45 V
On-Grid 2.50 V
222.09 ChrgVtgEqu Cell voltage setpoint for equalization
charge in V (expert mode)
2.30 V to
2.70 V
Off-Grid 2.45 V
VRLA,
On-Grid
2.55 V
FLA, On-Grid 2.50 V
222.10 ChrgVtgFlo Cell voltage setpoint for float charge in V
(expert mode)
2.20 V to
2.40 V
‒2.25V
222.11 BatTmpCps Battery temperature compensation in
mV
⁄
°C
(expert mode)
0.0
mV
⁄
°C
to
10.0
mV
⁄
°C
‒4.0
mV
⁄
°C
222.12 AutoEquChrgEna Automatic equalization charge (expert
mode)
Disable Disable Enable
Enable Enable
222.13 BatChrgVtgMan Manual setpoint of the battery charging
voltage with disabled battery management
in V (expert mode)
41.0 V to
63.0 V
‒54.0V
No. Name Description Value Explanation Default
value
To Next Page
Loading...
