CHAPTER 3
USING YOUR INTERACTIVE WHITEBOARD SYSTEM
17 smarttech.com/kb/170549
Setting Use Notes
Projector Name Displays the projector’s name
as set by an administrator
(maximum 12 characters).
You can set the projector’s name using the
remote management features (see
Remotely
managing your system through a network
interface
on page45 and
Remotely
managing your system through an RS-232
serial interface
on page53).
Location Displays the projector’s
location as set by an
administrator (maximum 16
characters).
You can set the projector’s location using the
remote management features (see
Remotely
managing your system through a network
interface
on page45 and
Remotely
managing your system through an RS-232
serial interface
on page53).
Contact Displays the contact name or
number for projector support
as set by an administrator
(maximum 16 characters).
You can set the contact name or number
using the remote management features (see
Remotely managing your system through a
network interface
on page45 and
Remotely
managing your system through an RS-232
serial interface
on page53).
Language menu
Language Selects language preference. Projector menu support is available in English
(default), Chinese (Simplified), Chinese
(Traditional), Czech, Danish, Dutch, Finnish,
French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal), Russian,
Spanish and Swedish.
Information menu
Lamp Hours Displays the current number of
lamp usage hours from 0 to
4000 hours from when it was
last reset.
Always reset the lamp hours after you
replace a lamp, because lamp service
reminders are based on the current hours of
use. See
Resetting the lamp hours
on
page29 for details on the lamp hours reset
procedure.
Input Displays the currently
displayed video input source
(VGA-1, VGA-2, HDMI or None).
Resolution Displays the projector’s most
recently detected video
source signal resolution and
refresh rate.
If there is no current video input source
signal, this setting displays the last known
source signal image resolution and refresh
rate.