SMART M600i6 - Page 69

APPENDIX B
REMOTELY MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
61 smarttech.com/kb/170549
Field Possible values Description
target tint
l + val
l – val
l = 0 to 100
The ranges must match the OSD ranges.
current tint Range: 0 to 100 The ranges must match the OSD ranges.
target sharpness
l + val
l – val
l = 0 to 31
The ranges must match the OSD ranges.
current sharpness Range: 0 to 31 The ranges must match the OSD ranges.
target hposition
l + val
l – val
l = 0 to 100
The ranges must match the OSD ranges.
current hposition Range: 0 to 100 The ranges must match the OSD ranges.
target vposition
l + val
l – val
l = -5 to +5
The ranges must match the OSD ranges. Values
depend upon the source.
current vposition Range: -5 to +5 The ranges must match the OSD ranges.
target whitepeaking
l + val
l – val
l = 0 to 10
The ranges must match the OSD ranges.
current whitepeaking Range: 0 to 10 The ranges must match the OSD ranges.
target degamma
l + val
l – val
l = 0 to 3
The ranges must match the OSD ranges.
current degamma Range: 0 to 3 The ranges must match the OSD ranges.
target red
l + val
l – val
l = 0 to 100
The ranges must match the OSD ranges.
current red Range: 0 to 100 The ranges must match the OSD ranges.
target green
l + val
l – val
l = 0 to 100
The ranges must match the OSD ranges.
current green Range: 0 to 100 The ranges must match the OSD ranges.