SMC Networks HRS Series - Safety Measures; Safety Instructions for Use; Personal Protective Equipment

DOC1001322
Chapter 1 Safety Instructions
1.5 Safety Measures HRS Series
1-4
1.5 Safety Measures
1.5.1 Safety instructions for use
 Read and understand this manual carefully before using the product.
 Before starting maintenance of the product, be sure to lock out and tag
out the breaker of the user's power supply.
 If operating the product during maintenance, be sure to inform all workers
nearby.
 Use only the correct tools and procedure when installing or maintaining
the product.
 Use personal protective equipment where specified (“1.5.2 Personal
protective equipment”).
 Check all parts and screws are fitted correctly and securely after
maintenance.
 Avoid working in a drunken or sick condition, which might cause an
accident.
 Do not remove the panels except for the cases permitted in this manual.
 Do not remove the panels during operation.
 Do not handle this product by any means other than specified in this
Operation Manual; this can result in damage to the product or fire.
1.5.2 Personal protective equipment
This manual specifies personal protective equipment for each work.
 Transport, Installing and Uninstalling
 Handling of circulating fluid
 Operation
Follow the instructions below when using the product. Failure to
follow the instructions may cause an accident and injury.
Always use safety shoes, gloves and head protection when
transporting, installing or uninstalling the product.
Always use safety shoes, gloves, mask, apron and eye protection
when handling the circulating fluid.
Always use safety shoes and gloves when operating the product.