SMC Networks HRS Series - Setting of Analog Output Signal

DOC1001322
Chapter 5 Display and Setting of Various Functions
HRS Series 5.4 Description of the Screen
5-53
・Setting of analog output signal
3. The product has two analog outputs. The following signals can be output as analog signals:
・ Analog output signal 1––“ Circulating fluid discharge temperature”
or “Circulating fluid electric conductivity” .
・ Analog output signal 2––“ Circulating fluid discharge temperature”
or “Circulating fluid electric conductivity” 

 In the case of option D" With electrical conductivity control", it can be set.
Table 5.4-20 Setting of analog output signal
1 By default
2 Option D" With electrical conductivity control" only.
No. Indication Item Output
*1
Circulating fluid
discharge temperature
0～100℃：0～10V
*2
Circulating fluid
electric conductivity
0.1～50.0μS/cm：0.02～10.0V
*1
Circulating fluid
discharge temperature
0～100℃：0～10V
*2
Circulating fluid
electric conductivity
0.1～50.0μS/cm：0.02～10.0V
Setting, selection and desplay
(1)
Analog
Output 1
Analog output signal 1
(2)
Analog
Output 2
Analog output signal 2
Setting of analog output signal
(1)
(2)
