SMC Networks HRS Series - Pump Operation Continuation Status Display PUMP KEEP RUN; Circulating Fluid Set Temperature SP

DOC1001322
Chapter 5 Display and Setting of Various Functions
HRS Series 5.4 Description of the Screen
5-15
・Pump operation continuation status display PUMP KEEP RUN
17. Displays the status of pump operation continuation setting.
[ ] lights up when the pump operation continuation setting is enabled.
(Refer to “KEY-LOCK, START-UP operating method, ANTI-FREEZING and WARMING-
UP”(P.5-42) for the setting of the status of pump operation continuation.)
・Circulating fluid set temperature SP
18. Displays the set temperature.
Touch the value in orange to display numeric keys to enter a value. Enter a set value.
The set temperature ranges are as follows:
Numeric keys
Item
Circulating fluid
temperature SP
Setting range
5℃ to 35℃
By default
20℃
Value shown in orange
Touch this mark
Enter a value
Example of an orange “Value”
Example of numeric keys
Set temperature error
In the case of out of
the setting range,
and displays an error
message.
Pump operation continuation
status display
PUMP KEEP RUN setting
is disabled
PUMP KEEP RUN setting
is enabled