SMC Networks HRS Series - Stopping the Product

DOC1001322
Chapter 4 Starting the Product
HRS Series 4.4 Operation Start and Stop
4-9
4.4.4 Stopping the product
1. Press [ ] button on the home screen.
Stop the operation.
The operating condition display [ ] flashes during the stop preparation period.
The operating condition display switches from [ ] to [ ] as soon as the
stop preparation starts.
[ ] display turns off when it has stopped running.
Fig. 4-10 Stopping the product
2. Please turn OFF the breaker. The touch panel turns off.
Except in case of an emergency, do not turn OFF the breaker before the
thermo-chiller operation comes to a complete stop. As this will cause
damage to the product.
⇒
Press
ON
ON
ON
OFF
Operation
Stopped
During stopped
preparation
Stopped