SMC Networks HRS Series - Serial Communication Setting

DOC1001322
Chapter 5 Display and Setting of Various Functions
5.4 Description of the Screen HRS Series
5-52
Table 5.4-19 Setting of serial communication
No.
Indication
Item
Setting, selection and display
(1)
Mode
Communication format
1
ASCII code
Binary data
(2)
Type
Standard
1
EIA RS-485
EIA RS-232C
(3)
Baud Rate
Communication speed
9600 bps
1
19200 bps
(4)
Device Address
Slave address
1 to 32
1 1
Select from
1 to 32
(5)
DIO Run/Stop 2
“Run/stop” by contact input
1
Disabled
Enabled
(6)
Communication
Status
Communication status
0000
Displays the
communication
status
1 By default
2 “Run/stop” operation of the product is carried out by the contact input signal, and by
reading/writing the “Change in set value of circulating fluid temperature” and “Operation status”
by serial communication.
Serial communication setting
(1)
(2)
(3)
(4)
(5)
(6)