SMC Networks HRS Series - Alarm Reset; Alarm Name

DOC1001322
Chapter 5 Display and Setting of Various Functions
HRS Series 5.4 Description of the Screen
5-21
・Alarm reset
1. After eliminating the cause of the alarm, press [ ] button to cancel the alarm.
When the alarm is turned off, alarm names disappear from the “Information” screen.
・Alarm name
2. Touch the “Alarm” on the “Information” screen to display details of the alarm. Touching alarm
one time displays the alarm information. Touching alarm twice displays alarm information
details. If the alarm utilizes a sub-code, this is displayed in the alarm information details.
Press
Alarm name
Information screen
Information screen
Information screen
Touch once
to select alarm
Touch twice
to go to alarm
information details
Alarm information details
If the alarm utilizes a
sub-code, that subcode is
displayed.