SMC Networks HRS Series - Option K Fluid Fill Port

DOC1001322
Chapter 3 Transport and Setting Up
HRS Series 3.5 Circulating Fluid Supply
3-35
3.5.3 Option K “Fluid fill port”
Open the cap of the fluid fill port and supply the circulating fluid to the fluid
level between “HIGH” and “LOW” levels of the fluid level gauge.
Fig. 3-22 supplying the fluid to the fluid fill port (An example)
 Comfirm that the valve of the drain port is closed to prevent the
supplied circulating fluid from draining out.
 Confirm that the fluid level is between “HIGH” and “LOW” levels of the
fluid level gauge. If it exceeds the specified level, the circulating fluid
will overflow.

Be sure to connect the piping from the overflow port to the drainage
pit