SMC Networks HRS Series - Inspection and Cleaning

DOC1001322
Chapter 7 Control, Inspection and Cleaning
7.2 Inspection and Cleaning HRL Series
7-2
7.2 Inspection and Cleaning
 Shut off the power supply to this product before performing cleaning,
maintenance or inspection, or it may cause electric shock, injury,
burn, or etc.
 When the panel has been removed for the purpose of inspection or
cleaning, mount the panel after the work is completed.If the product
is operated with the panel removed or open, it may cause injury or
electric shock.
 Do not perform key operation or setting of this equipment with wet
hands. Do not touch the electrical parts such as the power supply
plug. It may cause an electric shock.
 Do not splash water directly on the product or do not wash with
water. It might cause electric shock, fire, or etc.
 Do not touch the fins directly when cleaning the dust-proof filter. It
may cause injury.