SMC Networks HRS Series - Continuing Pump Operation

DOC1001322
Chapter 5 Display and Setting of Various Functions
HRS Series 5.4 Description of the Screen
5-43
Table 5.4-10 Settings of key-lock, startup operation, anti-freezing and warming-up
No.
Indication
Item
Explanation
Setting range
(1)
KEY LOCK
Key-lock

Disabled
－
Enabled
(2)
START-UP
Startup
operation

Disabled
－
Enabled
(3)
ANTI-
FREEZE
Anti-freezing

Disabled
－
Enabled
(4)
WARMING
UP
Warming-up

Disabled
－
Enabled
TEMP SP
Set temperature
5.0 to 35.0 ºC
 5.0 ºC
By default
・Continuing pump operation
2. Continuing pump operation can be set.
Refer to “■ About continuous pump operation function” (P.5-44) for this function.
This function is set to “Disabled” by default.
Following items can be set on “Continuous pump operation” setting screen:
・ Pump operation sustainable temperature
・ Pump operation sustainable time
Table 5.4-11 Settings for continuous pump operation
No.
Indication
Item
Explanation
Setting range
(1)
Temp. Limit
Pump operation
sustainable
temperature
“Continuous pump operation” ends
when the temperature reaches the
set temperature.
5.0 to 50.0 ºC
 45.0 ºC
(2)
Time
Pump operation
sustainable time
“Continuous pump operation” ends
when the set time has elapsed.
Set time: 0 sec––this function is
“Disabled”
0 to 9999sec
 0sec
 By default
Setting for continuous pump operation
(1)
(2)